080a42 mechanical properties
BS970 080A42 is a medium carbon steel with good tensile strength. BS970 carbon steel and alloy steel specifications can be heat treated to achieve a wide range of mechanical properties. The difference between the two is somewhat arbitrary: Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0 %. Product Features and Applications. sections commercialy available in black rounds,black billet,bright rounds, hexagons & flats. Normalising:
Heat uniformly and thoroughly at the selected tempering temperatures, between 550°C to 660°C and hold the 080A42 tool at heat for one hour per inch of total thickness. Typical Chemical composition (Values are maximums unless otherwise stated) Carbon 0.15% Silicon 0.25% Manganese 0.50% Phosphorous <0.040% Sulphur <0.040% Chromium 0.90% Nickel 3.50% Mechanical Property Requirements - Annealed condition C until heated through. 080M40 steel suppliers and stockholders delivering to the whole of the UK. Also offers platinum balls, brass balls, gold, titanium, aluminum, carbon and plastic balls. It is also available in a free-machining version, 212A42 . 0.15 Max. When 080A42 components made from bright bar are to be induction hardened it is recommended to machine the surface to remove the decarburised skin that may be present to ensure optimum hardness is achieved. strength & impact properties. Supplies Ball bearing steel of all types, along with carbon steel and specialty balls, to OEM's around the world. Mashinostr. It is also available in a free-machining version, EN8M (212A42) EN8 in its heat treated forms possesses good homogenous metallurgical structures, giving consistent machining properties. Most spring steel specifications are held to British Standard steel specifications including BS1449 & BS970. C and hold the 080A42 tool at heat for one hour per inch of total thickness. Tool & Die Steels Inc. MECHANICAL PROPERTIES (in “R” condition) C Si Mn P S Min 0.36 0.10 0.60 Max 0.44 0.40 1.00 0.05 0.05 Max Stress 700-850 n/mm² Yield Stress 465 n/mm² Min (up to 19mm LRS) 0.2% Proof Stress 450 n/mm² Min (up to 19mm LRS) Elongation 16% Min (12% if cold drawn) High quality BS970 080A47 Carbon Manganese Seamless Stainless Steel Tubing Cold Drawn from China, China's leading seamless steel pipe product, with strict quality control precision stainless steel tubing factories, producing high quality precision stainless steel tubing products. 080M40 is available from stock in round and flat bar and can be cut to your requirements. Elongation % Cold drawn 560 440 110 Turned & Polished 430 215 21. Users are advised to treat the tables as a guide only and to refer to the appropriate standard before specifying material. axles, spindles, studs, automotive and general engineering components. 080A42 is a medium carbon and medium tensile steel used mainly for applications requiring a higher uses: suitable for shafts ,axles & studs etc. Fine grain condition (available on request) is recommended for all heat treatment applications. Introduction. Machinability similar to that of mild steel can be expected, however weldability is reduced. Normalise 080A42 at 830-860°C, and cool in air. Welding En8 a 0.4% carbon steel - This procedure should be followed if the joint is under high restraint. Machinability similar to that of mild steel can be expected, however weldability is reduced. 0.15 Max. Readily machinable in any condition, 080M40 is used to manufacture axles, shafts, studs, bolts, and automotive parts. (From Normalised test piece) SIZE RANGE: 50mm to 650mm diameter SUPPLIED CONDITION: Untreated, Normalised, Drawn ALTERNATIVE SPECIFICATIONS: 080A42, Din 1.0511 SAE1040, C40, C45 C Si Mn PS Min 0.36 0.10 0.60 Max 0.44 0.40 1.00 0.050 0.050 Yield Strength MPa min. mechanical properties are achieved after a specified heat treatment 2.1.10 equivalent diameter the diameter of a hypothetical bar of infinite length of uniform circular cross section which, if subjected to the same cooling conditions as the product, i.e.same initial and final temperature and same Quench in oil or water. Check in all detailed data of EN8 carbon steel / 080M40 steel material. axles, spindles, studs, automotive and general engineering components. mechanical properties are achieved after a specified heat treatment 2.1.10 equivalent diameter the diameter of a hypothetical bar of infinite length of uniform circular cross section which, if subjected to the same cooling conditions as the product, i.e.same initial and final temperature and same Below is listed our most commonly supplied grades; please contact our sales office. Steel mould and Steel mould suppliers, global delivery, stock supply Steel mould steels. 080M40, also known as EN8, is a medium carbon steel with reasonable tensile strength, for applications requiring superior properties than mild steel. Reasonable machining and welding capabilities. Detailed below are our most common specifications. axles, spindles, studs, automotive and general engineering components. Comprehensive stocks held of tool steel, including hot work, cold work and plastic mould tool steel specifications. 080A42 is a medium carbon and medium tensile steel used mainly for applications requiring a higher strength than Mild Steel e.g. Complete BS 970 EN8 carbon steel definition, steel properties, chemical composition. Can also be induction or flame hardened. Round and flat bar is stocked in the as rolled condition. MECHANICAL PROPERTIES Condition Tensile Strength MPa min. 080A42 is a medium carbon and medium tensile steel used mainly for applications requiring a higher strength than Mild Steel e.g. bs970 080a42 (en 8d) general: a medium tensile steel. Grades for Potential Substitution – Grades capable of achieving similar mechanical properties (material may need further treatment to achieve the desired properties). 080M40 is normally supplied in cold drawn or as rolled and can be heat treated to a reasonbale hardness. strength & impact properties. Stainless Steel specifications held in the austenitic, martensitic and precipitation hardening varieties. 080M40 is normally supplied in cold drawn or as rolled and can be heat treated to a reasonbale hardness. Typical uses include Gears, King Pins, Sprockets, Shafts etc. Complete BS 970 EN8 carbon steel definition, steel properties, chemical composition. MECHANICAL PROPERTIES AT ROOM TEMPERATURE: Minimums unless stated. Normalising:
Carbon spring steel is held in a wide range of sizes. Heat uniformly to 830/860°C until heated through. 220M07 PB 230M07 PB. Unsuitable for welding. It got great weldability and machinability, let us see more mechanical details of this steel. People requiring better properties such as strength, etc generally go for alloy steels if En8d or equivalent grades are not suitable. Grades for Potential Substitution – Grades capable of achieving similar mechanical properties (material may need further treatment to achieve the desired properties). Yield Strength MPa min. Being one of the noted manufacturer, stockists and suppliers, weoffer En8D Carbon Steel Round Bar.Available at economical rates, the offered En8D Carbon Steel Round Bar are widely used in metallurgical, mechanical, electrical construction field, ships, military uses and automobile rear of products.We are a prominent name in manufacturing and supplying a wide range of En8D Carbon Steel … Users are advised to treat the tables as a guide only and to refer to the appropriate standard before specifying material. Mechanical properties have not been taken into account although, in many cases, they may be similar. 080A42 grade steel is a medium carbon steel capable of achieving moderate tensile strengths by normalising or quenching and tempering. It is also used for U bolts, concrete re-enforcing rods, forgings and non-critical springs. A low carbon, free cutting mild steel with added lead that improves machining with very little effect on mechanical properties. Steels containing carbon as their key alloying element are known as carbon steels. For such applications the use of EN8D (080A42) is advisable. Typical applications of 080A42 … Mechanical properties 080A42 Mechanical properties,Our production completely according to the 080A42 standards to meet the 080A42 mechanical performance, can also according to the customer request, to meet the requirements of customers of 080A42 mechanical properties. 080M40 in its heat treated forms possesses good homogenous metallurgical structures, giving consistent machining properties. Hi - Speed, high Speed Steel Tool Steel (made) : highly processed into the Tool Steel, carbon content high, while containing cr quantity is low (about 4%), reason burnish of Steel surface gloss darker, after heat can reach by HRc62 high hardness, resistance to rust performance not on a roll. BS 970 709M40 (EN19) A 1% typical chromium molybdenum steel with higher molybdenum. 080A42 grade steel is a medium carbon steel capable of achieving moderate tensile strengths by normalising or quenching and tempering. ** Typical Machanical Properties to be used as a guide only. Carbon steel strip and spring steel sheet is available most commonly in the hardened and tempered condition, though certain sizes are available in the annealed condition. Stainless Steel Suppliers | Hi-Steel HSLA-80 | Steel mould | Heat resistant steel | Tool Steel | Ball bearing steel | Spring steel | Alloy, Copyright 2003 - 2011 China longhai special steel Co., LTD is mainly engaged in all kinds of stainless steel 630 production, wholesale, retail enterprises, TEL:+86-15328239557 | FAX:+86-816-3639422 | E-mail:sales@specialsteel-jy.com | Add:119#,Jiangdong road, Sanhe Town,Jiangyou City, Sichuan Province, China | Zip:621701, Heat uniformly and thoroughly at the selected tempering temperatures, between 550. A low carbon, free cutting steel that is highly machinable with consistent properties giving a good surface finish. Stocks are held in British Standard and International standards. When 080A42 components made from bright bar are to be induction hardened it is recommended to machine the surface to remove the decarburised skin that may be present to ensure optimum hardness is achieved. Size Range. Elongation % Cold drawn 560 440 110 Turned & Polished 430 215 21. Please note the similar grades are based on chemistry only, and may not meet the necessary mechanical properties (in the standard ‘as stocked’ state). People requiring better properties such as strength, etc generally go for alloy steels if En8d or equivalent grades are not suitable. APPLICATIONS OF En8D Steel Typical applications of En8d steel round bar include gears, shafts, axles, bolts, studs, crane wheels, and machine parts. EN8DM (212A42) is a bright drawn medium carbon semi-free cutting steel, suitable for repetition machining, good for induction hardening. En1A Leaded. For such applications the use of 080A42 is advisable. Mechanical properties have not been taken into account although, in many cases, they may be similar. The purpose of this work was to increase plasticity of heat resistant steel after aging at the 500-1300 deg C temperature and to improve its operational reliability. Quench in oil or water. En1A Leaded. uses: suitable for shafts ,axles & studs etc. ** Typical Machanical Properties to be used as a guide only. [1][2] Most commonly, the phrase "alloy steel" refers to "low alloy" steels. 220M07 PB 230M07 PB. For such applications the use of EN8D (080A42) is advisable. APPLICATIONS OF En8D Steel Typical applications of En8d steel round bar include gears, shafts, axles, bolts, studs, crane wheels, and machine parts. It is also available in a free-machining version, EN8M (212A42) EN8 in its heat treated forms possesses good homogenous metallurgical structures, giving consistent machining properties. EN1APb / 230M07Pb is a low carbon leaded free cutting steel, bright drawn or smooth turned with a consistently excellent level of machinability. Product Features and Applications. 080A42: 817M40: 080M46: 826M40: 080M50: 655M13: 070M55: 722M24: 905M39: 735A50: 835M30: Limited Ruling Section. Can be induction hardened. AS Orlov Izobret. Mechanical Properties Thermal Properties Other Designations. Unsuitable for welding. 080A42 is a medium carbon and medium tensile steel used mainly for applications requiring a higher strength than Mild Steel e.g. bs970 080a42 (en 8d) general: a medium tensile steel. Available in heat treated condition e.g (R,S,T).Supplied as black round or square bar and bright round or square, and hexagons. Typical Mechanical Properties in Cold Drawn Conditions, info@macsteel.co.za | +27 (011) 871-0000 | | |, Copyright © 2020 Macsteel | Website & SEO done by Engineered Media, 7 Brook Road, Boksburg, Gauteng, South Africa, Big Boost for KG Montjane as Macsteel Donate Custom Wheelchair, New approach adopted in uncertain steel market, Pandemic, economic challenges to shape industry direction, Bright Bar – 080A42 (EN80) Bright Drawn & Peeled EN8 BS 970 080A42. (From Normalised test piece) SIZE RANGE: 50mm to 650mm diameter SUPPLIED CONDITION: Untreated, Normalised, Drawn ALTERNATIVE SPECIFICATIONS: 080A42, Din 1.0511 SAE1040, C40, C45 C Si Mn PS Min 0.36 0.10 0.60 Max 0.44 0.40 1.00 0.050 0.050 MECHANICAL PROPERTIES Condition Tensile Strength MPa min. Available in heat treated condition e.g (R,S,T).Supplied as black round or square bar and bright round or square, and hexagons. Below we detail our most common grades. The addition of lead plus the High Sulphur and phosphorous levels form a lubricating effect resulting in extremely improved machinability with little affect on the mechanical properties. Tempering:
Typical Chemical composition (Values are maximums unless otherwise stated) Carbon 0.15% Silicon 0.25% Manganese 0.50% Phosphorous <0.040% Sulphur <0.040% Chromium 0.90% Nickel 3.50% Mechanical Property Requirements - Annealed condition Normalise 080A42 at 830-860°C, and cool in air. 080M40 is available as flame cut steel plates which can be cut to your required sizes and normalised. Alloy steel is steel alloyed with a variety of elements in total amounts of between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. Provided with higher mechanical properties, AISI 1018 hot rolled steel also includes improved machining characteristics and Brinell hardness. Bar is commonly supplied in the cold drawn or as rolled condition. These steels can also contain 0.4% silicon, 1.2% manganese and small quantities of copper, nickel, molybdenum, aluminium and chromium. Other British Standard and international special steels and tool steels are also available, please contact our sales office. A low carbon, free cutting steel that is highly machinable with consistent properties giving a good surface finish. ISO 2938 Seamless Steel Mechanical Tubes Material 20MnV6 (MW 450) 34CrMo4 EN 10216-1/2 Quenched & Tempered Seamless Tubes for High Pressure Gas Cylinders ASTM A519 Grade 1008, 1010, 1018, 1020, 1025, 1026, 1040, 1045, 1050, 4130, 4140, 4150, 4340 AISI 4130 L80 according to API 5CT, 75K according to API 6A Quenched / Hardened & Tempered Heat uniformly and thoroughly at the selected tempering temperatures, between 550°C to 660°C and hold the 080A42 tool at heat for one hour per inch of total thickness. EN8: unalloyed medium carbon Steel (BS 970 080m40) has high strength levels compared to normal bright mild steel, due to thermo-mechanical rolling. A manganese molydenum steel with good ductily and mechanical strength. BS970 080A42 is a medium carbon steel with good tensile strength. BS 970 709M40 (EN19) A 1% typical chromium molybdenum steel with higher molybdenum. EN8 is suitable for all round engineering purposes that may require a steel of greater strength. Typical uses include Gears, King Pins, Sprockets, Shafts etc. A low carbon, free cutting mild steel with added lead that improves machining with very little effect on mechanical properties. Alloy steel grades are often supplied in the hardened and tempered condition. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. Where restraint is low, some relaxation of the following procedures may be possible. 080A42 '42'C 9: 070M55 '50'C: 1.1209/1.0535 ... bs 970 817m40 mechanical properties bs … MECHANICAL PROPERTIES AT ROOM TEMPERATURE: Minimums unless stated. Check in all detailed data of EN8 carbon steel / 080M40 steel material. Tempering:
Can also be induction or flame hardened. Heat resistant steel. sections commercialy available in black rounds,black billet,bright rounds, hexagons & flats. chemical analysis: ... 0.050 max : 0.050 max : typical mechanical properties: (example only) not applicable: heat treatment & condition commercialy. Mechanical Properties Typical (minimums typically) UTS (N/mm2) Yield (N/mm2) Hardness HB LRS (mm) Normalised Test Piece 550 280 152/207 150 Normalised Test Piece 510 245 146/197 250 Supply Condition: As rolled, as forged & normalised Alternative specifications: 080A42, SAE1040, C40 Also stock is 301 stainless spring temper rolled strip. Material Properties of S355 Steel - An Overview S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. A manganese molydenum steel with good ductily and mechanical strength. Mechanical Properties: Cold Drawn Not covered by mechanical properties tables in AS1443 Physical Properties: Specific Gravity (SG) Thermal Expansion cm / cm / °C 100°C Modulus of Elasticity In Tension (MPa 20°C) Magnetic Permeability 7.87 12.6 x 10-6 200,000 Ferromagnetic Heat Treatment: Forging Normalise Full Anneal Sub Critical Anneal Can be induction hardened. Suitable for heat treatment where extra strength is required. C45 Round Bar C45 Flat Bar C45 Hollow Bar C45 Tube / Pipe C45 Sheet / Plate C45 Strip / Coil C45 Wire C45 Forging C45 Tube / Pipe TEL:+86-13880247006 Please note the similar grades are based on chemistry only, and may not meet the necessary mechanical properties (in the standard ‘as stocked’ state). chemical analysis: ... 0.050 max : 0.050 max : typical mechanical properties: (example only) not applicable: heat treatment & condition commercialy. 32mm - 860mm Dia. Hardening:
3, 48-49, 7/2000.